When you are needing to kill and remove mold from your household, you will want and need equipment that will both make the job easier and help protect you from the dangers of mold exposure. You might feel as though you have been exposed to the mold living in your home for quite a while now and that it probably will not do you much more damage to just go through the remediation without any safety equipment, but you will be wrong about that. The mold spores in your home have not been stirred up nearly as much as they are about to be and if you are planning on performing any invasive procedures in order to get rid of the mold in your walls or in your ceiling, then the mold spore levels in your home’s air will absolutely skyrocket.
One of the first things you are going to want to purchase is a respirator of some kind. There are about three different general types that you can purchase and the respirator is the most important piece of equipment that you can buy for a mold remediation job. This is because the mold spores are in the very air that you breathe and even though gloves and protective clothing are also important, you have a fair amount of control of whether or not the mold comes into direct contact with your skin. Unless you have an allergy to the mold and require that it not get on your skin, the respirator is most important. However, if you have an allergy to mold, you should not be doing this job yourself in the first place.
An N-95 respirator is the basic respirator you will want if you are not planning on tearing apart any drywall or contaminated wallpaper. This will block about 95 percent of mold spores, dirt, and etcetera from entering your respiratory system.
If you want an extra level of protection, consider getting a half or even full-faced air purifying respirator. The good thing about these is that they do not require any training like the next level of respirator will.
Powered air purifying respirators require training and must be used following the regulations of OSHA.
Protective clothing should also be worn during the job. This can include a protective body suit, rubber gloves, and shoe coverings will be necessary, preferably made of a breathable material such as TYVEK. You should purchase a roll of tape, such as masking or duct tape, and wrap it around your wrists and ankles where there are gaps in your protective suit.
Wednesday, January 23, 2008
Mold Remediation Respirators
When you are working on killing or removing the mold from a building, the equipment that you will need to safely do this job can vary just a bit, depending on the size of the area you are trying to treat. You might just need some cloths, mold killing chemicals, rubber gloves, and a light respirator if it is just a surface infection like on a countertop or on a vinyl floor. But, if you are planning on tearing out any drywall and getting to an infection that exists inside your walls or ceiling, then you will need some protection equipment that is just a bit more extensive. There are different levels of protection equipment just as there are different levels of mold infestations and there are a few things that you need to know about respirators.
No matter what level mold infestation you are dealing with getting rid of, you will need an N-95 type respirator. This is about the minimum level of protection that you can use and the next level down would be using none at all; this is, of course not advised. When you are cleaning, mold spores are stirred up into the air, especially if you are taking out drywall or removing contaminated wallpaper, so even if you have been living in a contaminated household for a while, the risk you are taking by not using a respirator when you are getting rid of it is considerable. You can find this kind of respirator in most hardware and even some department stores.
Air purifying respirators are the next step up in protection and these always have HEPA filters in them. These filter out almost all particles that you are breathing in while you are working. This kind of respirator does not protect your eyes and are available in half face and full face kinds. The best thing about this kind of respirator is not only the HEPA filter, but also the fact that using this kind does not require any training. The next step in protection does.
The highest level of breathing protection will come from a powered air purifying respirator. These also come equipped with HEPA filters, but require electricity and some training in order to be able to use them. OSHA guidelines must also be followed to the letter if you are planning on using these respirators in a commercial setting.
All respirators must be approved for usage by the National Institute for Occupational Safety and Health.
No matter what level mold infestation you are dealing with getting rid of, you will need an N-95 type respirator. This is about the minimum level of protection that you can use and the next level down would be using none at all; this is, of course not advised. When you are cleaning, mold spores are stirred up into the air, especially if you are taking out drywall or removing contaminated wallpaper, so even if you have been living in a contaminated household for a while, the risk you are taking by not using a respirator when you are getting rid of it is considerable. You can find this kind of respirator in most hardware and even some department stores.
Air purifying respirators are the next step up in protection and these always have HEPA filters in them. These filter out almost all particles that you are breathing in while you are working. This kind of respirator does not protect your eyes and are available in half face and full face kinds. The best thing about this kind of respirator is not only the HEPA filter, but also the fact that using this kind does not require any training. The next step in protection does.
The highest level of breathing protection will come from a powered air purifying respirator. These also come equipped with HEPA filters, but require electricity and some training in order to be able to use them. OSHA guidelines must also be followed to the letter if you are planning on using these respirators in a commercial setting.
All respirators must be approved for usage by the National Institute for Occupational Safety and Health.
Mold Dogs are Unprofessional
When you go to hire a professional company that deals with mold contaminations, there are a few different things that you need to look for to determine whether or not the company is actually professional or not. Do they use the most modern methods of mold detection and cleaning? Do they wear protective gear? What kind of gear do they wear? Body suits? Respirators? And this is perhaps one of the most important questions of all: do they use animals to detect the presence of mold in your home?
The simple fact is that companies that use dogs to detect mold in a home or business are not professionals. They just are not. The practice of using dogs to detect mold in a home or in another building is inhumane and cruel to the animal, simply because of the knowledge that pets are just as susceptible to health damage due to mold as human beings are. A “mold dog” cannot detect whether or not the mold that exists in your home is toxic, what kind of mold it is, or in what quantity that it may exist. This is what mold laboratories and testing kits are for. All a mold dog can do is tell you if mold exists on the premises or not.
It can cost thousands of dollars for a company to have a dog trained to detect mold, but even after the dog is trained, it is almost surely money thrown down the drain. Dogs are trained to actively inhale mold spores, which is something that we as human beings are repeatedly told NEVER to do. We are told to wear respirators to filter these harmful spores out of the air that we breathe when we are dealing with mold. The animal is not aware that these spores can harm them at all. Dogs can develop severe skin, eye, and sinus infections and not to mention lung infections and even pneumonia. Unfortunately, the dog has no way of telling us that something is wrong with it. It knows, but cannot communicate this to us.
There are many other more modern, more professional ways to deal with the task of detecting mold on a piece of property. Any company that uses mold to detect dogs is not one that you want to deal with. Mold dog websites often have pictures of completely healthy animals and they will remain healthy for a while, but the typical cause of death is due to mold-related health complications.
The simple fact is that companies that use dogs to detect mold in a home or business are not professionals. They just are not. The practice of using dogs to detect mold in a home or in another building is inhumane and cruel to the animal, simply because of the knowledge that pets are just as susceptible to health damage due to mold as human beings are. A “mold dog” cannot detect whether or not the mold that exists in your home is toxic, what kind of mold it is, or in what quantity that it may exist. This is what mold laboratories and testing kits are for. All a mold dog can do is tell you if mold exists on the premises or not.
It can cost thousands of dollars for a company to have a dog trained to detect mold, but even after the dog is trained, it is almost surely money thrown down the drain. Dogs are trained to actively inhale mold spores, which is something that we as human beings are repeatedly told NEVER to do. We are told to wear respirators to filter these harmful spores out of the air that we breathe when we are dealing with mold. The animal is not aware that these spores can harm them at all. Dogs can develop severe skin, eye, and sinus infections and not to mention lung infections and even pneumonia. Unfortunately, the dog has no way of telling us that something is wrong with it. It knows, but cannot communicate this to us.
There are many other more modern, more professional ways to deal with the task of detecting mold on a piece of property. Any company that uses mold to detect dogs is not one that you want to deal with. Mold dog websites often have pictures of completely healthy animals and they will remain healthy for a while, but the typical cause of death is due to mold-related health complications.
Subscribe to:
Posts (Atom)
